Smart 3D is developed and manufactured by Large V. All related
intellectual properties are owned by itself. Smart 3D are CE and
ISO 13485 certified. It incorporates the most commonly-used imaging
modes, compact body and long-life. High-definition image quality, low-dose imaging protocols and
touch-screen user interface
two-side check fixing device and chin-rest for panoramic
acquisitions improves clarity and reducing the risk of re-takes.
Smart 3D is designed to be upgradable from panoramic imaging and
Cone Beam Computed Tomography to cephalometric.
The scanning ceph module allows clinicians to upgrade their
diagnostic capabilities while keeping costs to minimum.
High-resolution images provide all the clinical information needed
while keeping radiation exposure low. Full and Half width images
optimize dose to cater to dentist’s requirements.
3. CT Imaging
Practitioners can display the acquisition field of view on the
patient’s face, indicating the exact area during the examination.
Pre-program the fields of view from 5x5 to 15x8 according to
clinical application requirement. Zero dose presentation mode is
for safety and relax patient’s anxiety.
Self-developed and owned image reconstruction algorithms provide
high-quality images with drastically reduced x-ray dose. The image
reconstruction algorithms reduce the processing time of x-ray data
4. Integrates easily into the office network
Better diagnostics with panoramic imaging begins with accurate,
clear views of the patient’s anatomy. The Smart 3D is able to
capture well-defined, high-quality images with consistent
magnification and image uniformity with its powerful imaging tools.
Utilize its equipped software SmartV2, it realizes cloud sharing.
5. Multifunctional software
3D image view with intuitive user interface
Implant simulation with adjustment of sectional view
Airway segmentation and analysis
|X-ray Tube Voltage||60-100kV|
|X-ray Tube Current||2-10mA|
|Max Exposure Power||600W|
|CT Sensor Type||CsI+CMOS Flat Panel Detector|
|CT Field of View (D * H)||15cm x 8cm or 12cm x 8cm|
8cm x 8cm
5cm x 5cm
|CT Voxel Size||0.25mm|
|CT Spatial Resolution||2.0 lp/mm|
|CT Scan Time||15s|
|CT Exposure Time||13s|
|CT Reconstruction Time||15s~40s|
|Pan Sensor Type||CsI+CMOS Flat Panel Detector|
|Pan Sensor Pixel Size||0.1mm|
|Pan Exposure Time||6s~11s|
|Ceph Sensor Type||Csl+CCD TDI Detector|
|Ceph Sensor Pixel Size||27μm|
|Ceph Exposure Time||8s~13s|
|Focal Spot Size||0.5(IEC336)|
|Weight||With Ceph function: 335kg|
Without Ceph function: 285kg
|Power Requirements||AC220V±10%, 50Hz, 2000VA|
|Outer Dimensions||With Ceph function: 1978mm × 1526mm × 1693~2393mm|
Without Ceph function: 1100mm × 1526mm × 1693~2393mm
|Room Requirements||With Ceph function: 2.5m × 2.1m × 2.5m|
Without Ceph function: 1.6m × 2.1m × 2.5m